PDCCH Part-II

-

Home               LTE              NB-IoT          5G(NR-NSA)

 Hi Guys, today we are learning about PDCCH , if you missed our previous article  please click here.

PDCCH Part-II

What are Search Spaces?

The PDCCH is used to send control information to a group of UEs as well as to a particular UE. This means that the PDCCH is used by the eNodeB to broadcast information to a group of UEs. So, in order to simplify the process of decoding the PDCCH, the CCEs are divided into two Search Spaces:

  1. Common Search Space: It consists of the CCEs which are used for sending the control information common for all the UEs. Maximum number of CCEs present in common search space can be 16. Common search space CCEs are used by eNodeB for transmitting SIBs which are common for all UEs. 
  2. UE-specific Search Space: CCEs belonging to UE specific space are used for sending the control information for a particular UE. This means information present on UE specific CCEs can only be decoded by a specific UE.

What are Aggregation Level and PDCCH Candidate?

Aggregation level is defined as the number of consecutive CCEs used for sending control information. Its values can be 1, 2, 4 or 8.

PDCCH Candidate is the number of CCE indexes searched by a UE in a subframe for a particular search space. 

How to calculate the total number of REs available for PDCCH allocation?


 No. of REs for PDCCH = Total REs – (Number of REs for PHICH + Number of REs for PCFICH + Number of REs for reference signals).

Here, total REs refers to all REs in first ‘n’ OFDM symbols, where n is the value in PCFICH.
Total REs in first ‘n’ OFDM symbols = n * total number of RBs * number of subcarriers in 1 RB.

What are DCI Formats?

The DCI format is a predefined format in which the downlink control information is packed/formed and transmitted in PDCCH. It tells the UE how to get its data transmitted on PDSCH in the same subframe. DCI format (transmitted in PDCCH) is like a map for a UE to locate and decode PDSCH from the resource grid. 

 The DCI format gives the UE information such as number of resource blocks, resource allocation type, modulation scheme, transport block, redundancy version, coding rate etc. Each DCI format, when encoding, is attached with a CRC that is scrambled with the UE-RNTI to which the PDSCH is intended to. 

 So, only the intended UE can decode the DCI format and hence the corresponding PDSCH. 


DL DCI Formats:


  • Format 0 – used for transmission of Uplink Shared Channel (UL-SCH) allocation i.e. for providing UL grants.
  • Format 1 – used for transmission of DL-SCH allocation for Single Input Multiple Output (SIMO) operation
  • Format 1A – used for compact transmission of DL-SCH allocation for SIMO operation or allocating a dedicated preamble signature to a UE for random access
  • Format 1B – used for transmission control information of Multiple Input Multiple Output (MIMO) rank 1 based compact resource assignment
  • Format 1C – used for very compact transmission of PDSCH assignment
  • Format 1D – used same as format1B with additional information of power offset
  • Format 2 and Format2A – used for transmission of DL-SCH allocation for closed and open loop MIMO operation, respectively
  • Format 3 and Format 3A – used for transmission of TPC command for an uplink channel

UL DCI Formats:

  • Format 0 for scheduling of PUSCH (uplink grant)
  • Format 3 for Uplink transmit power control with 2 bit power adjustment
  • Format 3A for Uplink transmit power control with 1 bit power adjustment

How does eNodeB decide which DCI Format to use? 

eNodeB makes this decision based on the transmission mode and the RNTI type used for that particular PDCCH.

RNTI types:
  • SI- RNTI: Used for transmission of system information messages.
  • RA-RNTI: Used for PRACH responses.
  • P-RNTI: Used for the paging messages
  • C-RNTI: Used for transmission to a specific UE after RACH.
  • T-CRNTI: Mainly used during RACH.


How does eNodeB decide which Aggregation Level to use?


eNodeB makes this decision based on the size of DCI and the CQI ( channel quality indicator ) value received in uplink. The size of different DCI formats is defined in specs. 

 After selecting the DCI format we can find out the number of bits needed to send on PDCCH after applying the code rate.

In 1 CCE, 72 bits can be transmitted; since QPSK modulation is used in PDCCH. After considering the DCI size and the CQI value, eNodeB decides the aggregation level to use or the number of CCE's required for the control information for this particular DCI. 



Comments

Post a Comment

Popular posts from this blog

Soft Handover vs Hard Handover

-
Home                 LTE                NB-IoT            5G(NR-NSA) Now before we move to other things like measurements in handover, handover decision, handover procedure, handover interruption time, and mobility robustness optimization, let us take a look into difference between soft handover and hard handover. Soft Handover Hard Handover The handover in which radio links are added and removed in a way that MS always keeps at least one radio link to the UTRAN is known as soft handover. The handover in which all the old radio links in MS are removed before the new radio links are established is known as hard handover. This can also be simplified as make before break This can also be simplified as break before make As call drop rate is lower this handover is used to lower the rate of call drop. In this case higher rates of call drops are found Why soft handover is not included
Read more

5G Deployment Option-3/3a/3x

-
Image
Home                 LTE                NB-IoT            5G(NR-NSA)   Hi Guys today we are learning about 5G deployment options, if you want to know more about other 5G deployment option please  click here Option 3: EN-DC (EUTRA-NR Dual Connectivity) Option 3 represents a network having both LTE and NR radio access, but using only the EPC core of LTE to route the Control signals. In this option, LTE is used as the control plane anchor for NR, and both LTE and NR are used for user data traffic.(user plane). It could also be called as Non-Standalone (NSA) NR in Evolved Packet System. The only difference between Options 3 and 3A is based on whether the user plane data is sent to NR directly or via the LTE RAN. This standardization was concluded in 3GPP Rel-15. This is a possible first step in the migration towards 5G-SA. This option will be most attractive for operators which have early deployments of 5G NR access systems in areas where legacy eNB and EPC a
Read more

5G Deployment Option-7/7a/7x

-
Image
Home                 LTE                NB-IoT            5G(NR-NSA) Hi Guys today we are learning about 5G deployment options, if you want to know more about other 5G deployment option please  click here Option 7: Deployment Option 7 represents a deployment scenario in which the Next Generation Core (NGC) will be used with a mixture of LTE and NR radio.  Next Generation signaling will be used but it will be routed via the LTE RAN because the LTE network is more fully built out and thus more reliable for handling signaling.  Options 7 and 7a differ on whether the user plane data is sent to NR directly or via the LTE RAN. 7/7A/7X require an eLTE upgrade of the existing LTE network at the start. (Difference is UP path Non Standalone ( Dual Connectivity 4G/5G ) Option 7/7A: NSA NR in 5GS. This option is particularly attractive for areas in which legacy LTE eNBs and the EPCs are ready to be upgraded to ngeNBs and the 5GCs.  From the point of
Read more

DRX (Discontinuous Reception)

-
Image
Home                 LTE                NB-IoT            5G(NR-NSA)   What is DRX and DRX active period? What channels does it monitor in active period? Data transmission between UE and their base stations(eNodeB) uses radio frames with10ms duration, where in each radio frame consists of 10 1ms( 1 frame=10ms duration=10 subframe) subframes. Physical Downlink Control Channel (PDCCH) at the beginning of each subframe indicates whether there is data for UE to receive or not. Devices has to monitor these PDCCHs in each subframe so that it can find out whether they carry any data to receive. Because devices do not receive data in every subframe, this monitoring process naturally leads to high battery consumption.  What is the purpose of DRX? The main purpose of DRX is to lower battery consumption when there is no UL/DL data. means, when there is no traffic(DL/UL) that time devices enter into sleep mode (with RF module turned off) for some period of time as configured by
Read more

DC Carrier in NR

-
Image
Home                 LTE                NB-IoT               5G(NR-NSA) In this article, we will learn the basics of DC Carrier and why it is needed. Why in NR, DC subcarrier is not reserved like LTE? With legacy LTE (4G) it was decided that all devices (UE) should be capable of the maximum carrier bandwidth of 20MHz (UE can also support 10/15/5/3 MHz). This was a reasonable assumption at the time given the relatively modest bandwidth compared to NR, Whereas NR is designed to support very wide bandwidths up to 400MHz (for FR2) and 100Mhz (for FR1) for a single carrier. As well as NR supports multiple numerologies on the same transmitted carrier frequency. It is not necessary that all devices can support up to 400 MHz Bandwidth, hence in NR BWP concept is introduced. (To learn more about BWP Click here ). Note: in the above and below NR case figure, we assume that for each and every BWP have configured some  txDirectCurrentLocation  value.     As shown in the a
Read more

Authentication in LTE

-
Home                 LTE                NB-IoT            5G(NR-NSA)   What is Authentication and what type of Authentication is used in LTE? Authentication is a process by which both the UE and Network check whether the other party is authorized to communicate with them. In LTE and WCDMA, a mutual authentication process is used i.e. the Network checks whether the UE is authorized to camp on it and the UE also checks whether it is trying to camp on is the correct Network. The UE becomes authorized to camp on a network by subscribing to the network. In LTE, EPS AKA i.e. Authentication Key Agreement procedure is used for Mutual Authentication. Why is Authentication required from both sides in LTE? The UE needs to be authenticated by the NW to check whether it has subscribed to the NW or not. Only UEs which have a valid subscription should be allowed to camp on the NW. The NW should also be authenticated by the UE because if the UE does not check its
Read more

HARQ RTT Timer

-
Home                 LTE                NB-IoT            5G(NR-NSA)   Hi guys today we are focus on HARQ RTT timer in DL as well as UL for LTE and NB-IOT. What is HARQ RTT Timer? This parameter specifies the min amount of TTIs before a DL HARQ retransmission is expected by the UE. (3GPP TS 36.321 V8.0.0) Simple way to understand: the HARQ Round Trip Time (RTT) timer is defined for UE to sleep during HARQ RTT. When decoding DL TB for one HARQ fails, UE can next retransmission TB after at least HARQ RTT sub frames. While HARQ RTT timer is running, UE need not monitor PDCCH. At HARQ RTT timer expiry, UE resumes PDCCH reception. Two type of HARQ RTT timer is there. HARQ RTT Timer : This parameter specifies the minimum number of subframe(s) before a DL HARQ retransmission is expected by the MAC entity. (3GPP TS 36.321 version 13.3.0 Release 13) UL HARQ RTT Timer : This parameter specifies the minimum amount of subframe(s) before a UL HARQ retransmission grant is e
Read more